ModIT
-
سﻮﺑ
ﺔﺤﻔﺻ
10
ﻦﻣ
21
4
.
Installing Host System
One of the features of the Boss Module is the ability to install a Mac mini inside. This provides
different levels of sophistication to the ability of your device
.
There are 8 screws on the underside of the case and 7 on the rear that need to be removed
there are also two pins on each side of the boss unit that will need to be removed
.
Remove these using a screwdriver and slide the top of the Boss Module 4 inches, as
demonstrated in the in the graphic below
.
The graphic below demonstrates how the product should look at this stage. Notice the
highlighted yellow screws, which should all have been removed at this point
