ModIT-MAX
Página 24 de 41
sudo apt remove program_name
You’ll be asked to enter your account password. When you enter it, nothing is visible on the
screen. You will need to confirm removal, it will ask for your confirmation, press the enter key or
Y key: Keep in mind that you’ll have to use the exact package name in the apt remove
command otherwise, it will show ‘unable to locate package error‘. You can type the first few
letters of the program you want to uninstall, and then hit the tab key. It will show all the
installed packages that match those letters at the beginning of their names.
5.5.6 Command Line Instructions (CLI)
Command Line Instructions can be used to control and monitor the functions of the
hub and attached devices. To use the command-line interface a serial terminal emulator must
be installed on the host computer. Examples include Serial, ZTerm, PuTTy, and Minicom. If you
would like more information, please look at our more in-depth information here:
www.cambrionix.com/cli
Two example commands can be seen below, you can use these commands to check hub
information and health.
Command
Action
system
Show hardware and firmware information
health
Show voltages, temperatures, errors and boot flag
