CAMBRIDGE Topaz SR20, Руководство пользователя

Страница: 15 / 17

15
CXR120/200
ENGLISH
Select 'Scan for Networks', select your wifi network and then enter your
password.
CXR Setup Menu
Speaker Setup
Input Setup
Zone 2 Settings
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
Network
CXR Setup Menu
Speaker Setup
Input Setup
Zone 2 Settings
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
Enter Password
A
Retry connection
Retry if the connection failed.
General settings
CXR Setup Menu
Speaker Setup
Input Setup
Zone 2 Settings
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
OSD Language
Auto Power Off
Eco Mode
Front Panel Dim
Network Standby
AM Tuner Steps
FM Tuner Steps
English
30 Minutes
Enable
Bright
Disable
9 KHz (EU)
50 KHz (EU)
OSD language
Choose language for on screen display.
Auto power off
If nothing is playing CXR will turn off after 30mins. You can change this to 1
Hour, 4 Hours, 8 Hours and Off.
ECO mode
0.5W standby mode where Standby HDMI Bypass and Network Standby
cannot be used.
Front panel dim
Change the brightness of the CXR display.
Network standby
Enable: The network connection is always on and CXR can be powered on
from the Connect App.
AM tuner steps
Set AM tuner steps for EU or USA.
FM tuner steps
Set FM tuner steps for EU or USA.
HDMI output setup
CXR Setup Menu
Speaker Setup
Input Setup
Zone 2 Settings
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
Standby HDMi Bypass
TV ARC (HDMI OUT 1)
CEC Control
CEC Power Off Control
CEC Power On Control
On Screen Info Display
HDMI
Enable
Off
Disable
Disable
On
Standby HDMI bypass
Allows one HDMI source to be sent to your TV when the CXR is in standby
mode, for example if you want to use your TV's speakers.
TV ARC (HDMI out 1)
ARC allows a TV to send audio back down its incoming HDMI so that you can
play back the audio from a TV source whilst you watch its picture.
CEC control
Turn on to enable CEC control features.
CEC power off control
Allows the CXR to be switched off into standby by the TV.
CEC power on control
Allows the CXR to be switched on from standby by the TV.
On screen info display
When enabled, the input is changed or the info button on the remote control
is pressed the Source name, Audio signal type and volume setting will be
displayed on your screen.
Advanced setup
CXR Setup Menu
Speaker Setup
Input Setup
Zone 2 Settings
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
Mute Level
Mute Analogue REC Out
Front IR
Main Power on volume
Advanced Dolby/DTS
Trigger 1 Out
Trigger 2 Out
Mute
None
Enable
- 30 dB
►
►
►
Mute level
Select complete Mute, -10dB below current level or -30dB below current
level.
Mute analogue REC out
Use this to prevent the analogue input your recording device is connected to
being looped back to its input.
Front IR
If disabled, re-enable using the volume control to navigate and select.
Main power on volume
Sets maximum volume level when powering the CXR on.
Advanced Dolby/DTS
Panorama mode – A Dolby Pro Logic II/IIx mode that extends the front Stereo
sound to the surround speakers.
Centre Width – Adjusts from 100% Center speaker (Setting 0) to center
speaker signal being sent completely to left and right main speakers
(Phantom Centre, Setting 7).
Dimension – Adjusts the soundfield to shift gradually from the front of the
room to the back.
Dolby DRC (Dynamic Range Control)
Limits the difference in level between loud and quiet passages.
Dolby D EX modes
Decoding of Dolby EX encoded tracks for surround speakers.
Height gain
Sets the gain of height speakers.