CAMBRIDGE Qt 100 Скачать руководство пользователя страница 15

Q t   1 0 0   I N S T A L L A T I O N   &   O P E R A T I O N S   G U I D E

15

Obtaining warranty repairs: 

Please access and review online help 

resources for the product before requesting warranty service. If 

the product is still not functioning properly after making use of 

these resources, please contact Cambridge Sound Management 

for a return authorization number. All returns are to be prepaid. 

The warrantor will pay return surface freight within the 

continental United States on warranty repairs. All customs and 

freight charges in excess of surface freight within the United 

States will be born by the purchaser. 

Warranty Limits and Exclusions 

This warranty ONLY COVERS failures due to defects in materials 

or workmanship, and DOES NOT COVER normal wear and tear 

or cosmetic damage. THIS WARRANTY DOES NOT COVER USE 

OF THE SYSTEM WITH ANY OTHER SPEAKER OR EMITTER 

MANUFACTURED BY ANY ENTITY, ORGANIZATION OR 

COMPANY OTHER THAN CAMBRIDGE SOUND MANAGEMENT, 

LLC OR USE OF THE SYSTEM FOR ANY PURPOSE OTHER 

THAN SOUND MASKING AND/OR PAGING AND/OR MUSIC 

DISTRIBUTION. THIS WARRANTY DOES NOT COVER THE USE 

OF ANYTHING OTHER THAN CAT-3 OR EQUIVALENT, 24 GAGE 

CABLING.  The warranty ALSO DOES NOT COVER damages 

that occurred in shipment, failures that are caused by products 

not supplied by the warrantor (e.g., replacement power 

supplies) or failures that result from accidents, misuse, abuse, 

neglect, mishandling, misapplication, alteration of any sort, 

installation, use as a system driver during speaker installation, 

set-up adjustments, misadjustment of controls, improper  

maintenance, power line surge, lightning damage, power surges, 

modification, rental use, service by anyone other than the 

warrantor or damage that is attributable to acts of God.

THERE ARE NO EXPRESS OR IMPLIED WARRANTIES 

EXCEPT AS LISTED UNDER “WARRANTY COVERAGE.” THE 

WARRANTOR IS NOT LIABLE FOR ANY INCIDENTAL OR 

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF 

THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS 

WARRANTY. As an example, this specifically excludes damages 

for lost time, lost use of the system, cost of removal or re-

installation of the system or travel to and from the purchaser’s 

location. ALL EXPRESS AND IMPLIED WARRANTIES ARE 

LIMITED TO THE PERIOD OF THE WARRANTY.

This warranty provides specific legal rights, and there may 

be others that vary from state to state or in the country of 

compliant use. Therefore, certain additional exclusions may 

apply.

Содержание Qt 100

















Отзывы: