2011
3
Cambridge Pre-Packaged
Olde English Paver Fireplace Kit Deluxe Surround
Cambridge Fireplace:
This unit is capable of burning natural gas, propane and wood. If either propane or natural gas is the
preferred method of burning, seek a licensed professional plumber before construction. Also, if using
propane or natural gas, a knockout is located on either side of the unit to facilitate gas piping. All pip-
ing and knockouts must be completed before installing blocks around unit as the unit will become inac-
cessible when construction is completed.
Tools Required for Fireplace Kit Installation:
Safety Goggles
Ear Protection
Dust Mask
Gloves
Shovels (digging & flat)
Metal Cutters for banding on cubes
Mason Hammer (chipping, hammer)
Road Stone Rake
Tamper (Hand or Mechanical)
Wheelbarrow
Level (2’ and 6’ recommended)
Speed Square
Caulk Gun 10 oz or 28 oz (depends on what size
adhesive is purchased)
Rubber Mallet
14” Demo saw with diamond blade
Tape Measure
Marking Device (pencil, soap stone, etc)
Chalk Line
Hand Broom
Concrete Tools (Trowel/Floats)
6 Foot ladder or scaffold according to your com-
pany’s state, and OSHA safety policy
Drill & 1/16” bit
5/16” nut driver
7 ¼” Circular saw with wood blade
4” Electric grinder
4” Diamond cup grinder
15’ Ratchet strap
Items Included in the Fireplace Kit:
1 - Lennox
™
Stainless Steel Fireplace with instruc-
tion manual
1 - 4 Foot air-cooled chimney
1 - Black powder coated termination cap
1 - Galvanized flashing for top of completed fireplace
1 - Reinforced concrete lintels 48” x 4” x 6”
4 - Reinforced concrete lintels 32” x 4” x 6”
3 - Plastic shim pack sheet for leveling lintels or
block as needed
1 - Cast Stone Surround Deluxe
3 - Cubes of Cambridge Olde English Pavers
1 - Installation manual for concrete pad and Olde
English Pavers
Material Required:
¾” clean stone (approx. 1 ton)
Concrete (approx. 17-80 lb bags)
Cambridge concrete adhesive (approx. 6-29 oz. or
17-10.3 oz. tubes)
(4 pcs) 2” x 4” x 8’ lumber
2 ½” wood screws
½” rebar (approx. 11’)
Silicone for flashing
