Turning the speakers off
– Turning the
Master Speaker
off will turn off all the speakers.
–
Turning a Slave Speaker off first will only turn that speaker off and the other Slave Speakers will continue to play. The
Master Speaker
will play as a single speaker if no other Slave Speakers are connected.
Turning the speakers back on
– Turn all the speakers on and repeat the pairing process - S
ee page 17 for instructions.
– Turn one speaker on and the speaker can be paired and connected with another device. The speaker will play as a single speaker.
Disconnecting the speakers from each other
– To disconnect a single Slave Speaker, press and release the
Multi-Function Button
on the speaker. All other Slave Speakers will stay
connected to the Master Speaker.
– To disconnect all the speakers, turn off the Master Speaker or press and release the
Multi-Function Button
on the Master Speaker.
The speakers will all be disconnected from the Master Speaker.
– If the Slave Speaker(s) are not turned off and are disconnected by pressing and releasing the
Multi-Function Button
on the Master
Speaker. The speakers will automatically reconnected when the Master Speaker when
Multi-Function Button
on the Master
Speaker is pressed and released again. If a Slave Speaker is turned off the
Multi-Function Button
on the speaker will need to be
pressed and released to enter Surround Mode.
Note:
To pair a Slave Speaker with a flashing Orange Light with another device, press and release the
Multi-Function Button .
The
Source Button Light will begin flashing Blue and the OontZ Angle 3 Pro is ready to pair and connect with the device.
Page 19
Surround Mode - Important Notes
