background image

  The amount of power needed 

to drive loudspeakers varies 

significantly.  It it effected by factors 

such as the size of the room, 

absence of presence of in-wall 

volume controls, the acoustics, the 

type of music, and how loud you 

play the speaker.

   Even the smallest 

Ambiance 

loudspeaker can play safely with 

the most powerful home amplifiers 

and receivers.  Distortion caused 

by overdriving either the speaker or 

associated equipment can cause 

damage, even if the amplifier 

or receiver power is within the 

capabilities of the speaker.

   If the sound becomes “grainy” 

or “gritty”, you may be overdriving 

the amplifier or receiver.  This 

type of distortion can damage 

tweeters, even from a low powered 

amplifier.  Turn down the volume 

until the distortion disappears.  If 

the new level is not loud enough 

for your needs, you may need a 

more powerful amplifier.  Contact 

the retailer where you purchased 

your speakers, or a Cambridge 

SoundWorks Audio/Video Consultant 

for advice.

   Keep the volume turned down 

when connecting or disconnecting 

components in order to prevent 

damage from strong, non-musical 

transients.  This will help protect 

your ears, as well as the speakers.

   If the speaker is overdriven for 

an extended period, the high-

frequency output will be reduced.  

This is a result of the automatic 

tweeter protection built into each 

speaker.  If this occurs, simply 

reduce the volume and the circuit 

will automatically reset.

  If you suspect there is a problem 

with your 

Ambiance 

loudspeaker, 

contact the retailer where it 

was purchased or a Cambridge 

SoundWorks Audio/Video 

Consultant, who will help you track 

down the problem.  If together you 

agree there is something wrong with 

your 

Ambiance

 loudspeaker, return 

it to the retailer that sold it to you.  

Mail-order and Internet retailers 

will generally require a Return 

Authorization number.  Products 

purchased from a Cambridge 

SoundWorks store, you may call us 

for a factory Return Authorization.  

Do not return the 

Ambiance

 

loudspeaker or any parts 

without first obtaining a Return 

Authorization.

About Amplifier Power

In Case of Difficulty

5

6

Содержание Ambiance 602













Отзывы: