Cambridge Elevating Elmira, Руководство по конструкции

Страница: 4 / 21

www.CambridgeElevating.com August 2017
4
Provisions By Others

Provide one permanent 220/1/60 (30 amps) & one 110/1/60 (15 amps) power source to the
designated machine room location. Both electrical disconnects are provided by the elevator
manufacturer.

Provide appropriate sleeves for both the electrical conduit and hydraulic line from the drive unit to
the hoistway. Trenching may be required if the machine room is not adjacent to hoistway.

Provide an enclosed, plumb and square hoistway with smooth interior surfaces, as per elevator
manufacturer's engineered drawings. Include for fascias or furring of hoistway interior. To be
inspected and confirmed by elevator contractor prior to elevator installation.

Provide required overhead clearance based on engineered drawings.
 Provide floor finishes inside elevator cab.

Suitable lintels over landing entrances are to be provided for Cambrian model only – per Cambrian
Landing Frame Details, see page 12.

Provide required rough openings at each hoistway landing as per elevator manufacturer's
engineered drawings.

Provide sufficient machine-room area suitable to contain hydraulic power unit and elevator
controller & disconnect based on elevator manufacturer's engineered drawings.

Provide telephone connection to outside line for integration into elevator controller.

Provide required pit depth and size as per elevator manufacturer's engineered drawings.

Provide substantial level pit floor slab to support loads indicated on elevator manufacturer's
engineered drawings.

Provide required structural support for guide rail fastenings as per elevator manufacturer's
engineered drawings.

Install rail bracket inserts (Supplied by CE) into concrete rail support wall during construction per
elevator manufacturer's engineered drawings, only if required.

Provide required building permit(s) and/or engineering services as per local authorities.

Provide pit water proofing or sump pump, only if required.

Provide all finishes around landing door frames and landing entrances.