8
Rear panel connections
Cr/
Pr
Cb/
Pb
Y
Composite
S-Video
Component
Video Out
Toslink
Optical
S/P DIF
Co-axial
SW
L
R
Digital
Outputs
2.1 Channel Audio Out
SCART (Composite/RGB/Stereo Audio)
Trigger In
12V @ 30mA
Tip +ve
HDMI Out
On
Off
Power AC
www.cambridge-audio.com
Power Rating:
100-240V AC ~ 50/60Hz
Max Power Consumption:
15W
Designed and engineered in London, England
Sonata DV30
DVD Player
Power
1
2
5
6
7
8
Power On/Off
Switches the unit on or off.
AC power socket
Once you have completed all connections, plug the AC power cable into an appropriate
mains socket then switch on. Your unit is now ready for use.
HDMI Out
HDMI (High-Definition Multi-Media Interface) is a purely digital connection that can
carry both audio and video. Use a dedicated HDMI cable to connect to a TV or monitor
with a compatible HDMI input.
Analogue Video Outputs
Composite
– Connect to your television via 75ohm RCA/phono cable designed
specifically for video use.
S-Video
– Connect to your television via dedicated S-Video cable.
Component
– Connect to the YCbCr or YPbPr terminals (often coloured Red-Green-
Blue) of a television set via three 75 ohm RCA/phono cables designed specifically for
video use.
Note:
Component is enabled by default – 720p (50Hz) for PAL, or 720p (60Hz) for
NTSC.
1
2
4
4
3
Note: The preferred connection method for video sources is always HDMI (highest
quality, and can also carry audio in some circumstances), then Component Video,
RGB/SCART, S-Video, and Composite Video (lowest quality). The HDMI and
Component outputs also support Progressive Scan which gives better picture
quality if supported by your TV.
3
