11
3. Press the Open/Close button again to close the tray. The CD player will read the disc.
4. To begin playback, press the Play button.
5. When the last track has finished playing, the display will return to Table of Contents (TOC).
6. To stop the disc at any point, press the ‘Stop’ button. To pause the disc, press the ‘Pause’ button. Playback can then be resumed by pressing the
‘Play’ button again.
LOCATING A SPECIFIC TRACK DURING PLAYBACK
1. A single short press of the forward ‘Skip/Scan’ button will take you to the beginning of the next track on the CD. Repeat as necessary.
2. A single short press of the reverse ‘Skip/Scan’ button will take you to the beginning of the previous track.
LOCATING A SPECIFIC TRACK WHEN PLAYBACK IS STOPPED
1. A single short press of the reverse ‘Skip/Scan’ and forward ‘Skip/Scan’ buttons will skip between tracks in their relative directions.
2. Press ‘Play’ to start playback from the selected track.
REPEATING DISCS AND TRACKS
1. Ensure that the disc is loaded.
2. To repeat a specific track, press the Repeat button on the remote. ‘RPT ONE’ will appear on the display. Press ‘Play’ and the selected track will
now repeat until the function is turned off. Alternatively, press the Repeat button, select the chosen track using the numerical buttons on the
remote control and press ‘Play’.
3. Press the Repeat button twice on the remote control. ‘RPT ALL’ will appear on the display. Press ‘Play’. The whole disc will now be repeated until
the function is turned off.
4. To turn the Repeat function off, press the Repeat button either before or during playback until ‘RPT OFF’ appear on the display.
PLAYING TRACKS IN RANDOM ORDER
1. Ensure that a disc is loaded.
2. Press the Random button on the remote control. ‘RAN ON’ will appear on the display.
3. Press ‘Play’. The CD player will now play the entire disc in random order. It is also possible to press the Random button during playback to listen
to tracks in random order.
4. Press the Random button to exit. The disc will continue playing to the end in the correct order.
5. Press the ‘Stop’ button at any time to stop the disc.
Note: Selecting ‘Random’ mode when ‘RPT ONE’ has been selected will automatically cancel ‘RPT ONE’ mode.
USING THE REMAIN FUNCTION
1. Ensure that the disc is playing.
2. Press the Remain button on the remote control once to display the time remaining for the track playing.
