Cambridge Audio Azur 752CXU, Руководство пользователя

Страница: 12 / 14

12
(Place a disc on the tray)
#PLA ; Start playback
@OK PLAY ; You may get “ER OVERTIME” message due to the
; mechanical delay. This is normal
#QDT ; Check disc type
@OK LOADING ; Player is still loading
(Wait for a while)
#QDT ; Check disc type again
@OK BD-MV : Disc is a Blu-ray disc.
#QPL ; Check playback status
@OK PLAY : Playback is in progress
(Watch the movie)
#STP ; Stop playback
@OK STOP : Playback has stopped
#EJT ; Eject the tray
@OK OPEN ; Tray opens
(Take out the disc)
#POF ; Turn off power
@OK OFF ; The player turns off
Example 2 – Verbose mode 2. The player provides important status updates.
#SVM 2 ; Set verbose mode to level 2
@SVM OK 2 ; Response to confirm the verbose mode. Notice the
; SVM command code is now included in the response.
#PON ; Turn on power
@PON OK ON ; Player is turned on
@UPW 1 ; Player provides a status update to indicate the new power
; status
@SVM OK 2 ; This is a repeat of the SVM response because the main
; processor comes on line.
@UPL DISC ; Player indicates that there is no disc
#EJT ; Eject the tray
@EJT OK OPEN ; Tray opens
@UPL OPEN ; Player indicates that the tray is open
(Place a disc on the tray)
#PLA ; Start playback
@PLA OK PLAY ; Player confirms playback action
@UPL CLOS ; Player indicates that the tray is closing
@UPL LOAD ; Player indicates that the disc is loading
@UDT BDMV ; Player indicates that the disc type is Blu-ray
@UAT DT 01/01 ENG 5.1 ; Current audio is Dolby TrueHD English 5.1ch
@UST 00/00 UNK ; Current subtitle is none
@UPL PLAY ; Current status is playing
(Watch the movie)
#STP ; Stop playback
@STP OK STOP ; Player confirms stop action
@UPL STOP ; Player indicates that playback has stopped
@UPL STOP ; It is normal to see repeated status update
#EJT ; Eject the tray
@UPL STOP