Gallery Court, Hankey Place, London SE1 4BB England Tel: +44 (0)20 7940 2200 Fax: +44 (0)20 7940 2233 Web: www.cambridge-audio.com
1.4.9 Group 9 - Replies from Audio Processing Commands
Command
Number
Command Description
Command Data
Example
01
Set Audio to Stereo
00 = Stereo, 01 = SW
#9,01,01\r - Audio set to stereo mode plus sub
02 Set
PLII/Neo/DSP
xxxxxxxx
#9,02, PCM + PLIIx Movie \r - Describes the
mode it's just switched to exactly as on front
panel
03 DD/DTS
xxxxxxxx
#9,03, Dolby Digital (2/0) \r - Describes the
mode it's just switched to, exactly as displayed
on the front panel
04
Get current PLII/Neo/DSP
mode xxxxxxxx
#9,04, PCM + PLIIx Movie \r - Describes the
current mode
05
Get current DD/DTS mode
xxxxxxxx
#9,05, Dolby Digital (2/0) \r - Describes the
current mode
1.4.10 Group 10 - Replies from Version Commands
Command
Number
Command Description
Command Data
Example
01
Get Main Software Version
X.X
#10,01,1.2\r - Software is version 1.2
02 Protocol
Version
X.X
#10,03,1.6\r - Protocol is version 1.6
1.4.11 Group 11 - Error Messages
Command Command Description
Command Data
Example
Number
01
Command Group Unknown
No Data
#5,01,\r - Command group error
02
Command Number in Group
Unknown
No Data
#5,02,\r - Command number error
03
Command Data Error
No Data
#5,03,\r - Command data error
Information in this document has been carefully checked for accuracy; however, Cambridge Audio's policy is one of continuous improvement, therefore design and specifications are subject to
change without prior notice. If you notice any errors please feel free to email us at:
. This document contains proprietary information protected by copyright. All
rights are reserved. No part of this document may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. © Copyright
Cambridge Audio Ltd 2007
