6
Display functions
Play
Illuminated during disc playback.
Pause
Indicates that disc playback has been paused.
Display
Alpha-numeric characters which display playback information. On inserting
a disc, the CD player will take a few seconds to read the Table of Contents
(TOC) information from the disc. The display will then show the number of
tracks on the CD and the total length of the CD.
If the CD incorporates CD-text, the name of the album will scroll once
(the number of tracks remains stationary throughout). Once playback of
an individual track begins, the track number, total number of tracks and
play-time will be displayed. On a CD containing CD-text, the track name
will scroll once. Pressing the (Info) button on the remote control will
re-display the CD-text.
Random
Indicates random playback mode.
Remain
Illuminated when displaying time remaining on track or disc.
Repeat All/Track
Illuminated when ‘Repeat Track’ or ‘Repeat All’ is selected.
1
2
3
4
5
6
1
2
3
4
5
6
Front panel controls
Standby/On
Switches the unit between On and Standby mode. The blue LED will
remain bright when the unit is on, becoming dim when the unit is in a
special eco-friendly standby mode. The unit consumes less than one watt
of power during standby. The unit can remain in Standby mode when not
in use. It is advisable to switch the unit off at the mains if it is not likely
to be used for an extended period of time.
Note:
For convenience, the player can be programmed to automatically
enter Standby mode after a period of inactivity. To enable this feature,
see “Using the set-up menu” on page 9.
Open/Close
Allows you to open and close the disc tray. After placing a CD in the tray,
press
Open/Close
to close the tray.
Infrared sensor
Receives IR commands from the supplied remote control. A clear,
unobstructed line of sight between the remote control and the sensor is
required.
Play/Pause
Plays the disc and pauses play.
Stop
Stops the CD playing.
Skip/Scan
Enables you to skip between and search within tracks. Press briefly to
skip a track. Press and hold to scan through a track.
1
2
3
1
2
3
4
5
6
4
5
6
