Cambridge Audio Azur 351R, Руководство по обслуживанию

Страница: 4 / 46

4
1
Standby/On
Switches the unit between Standby mode (indicated by a dim power LED) and
On (indicated by a bright power LED). Standby is an eco-friendly <0.5W low
power mode. The unit may be left in Standby mode when not in use.
Note: This product has APD (Auto Power Down) enabled as default. After a
period of inactivity, the product will automatically switch to Standby.
2
Phones
Allows for the connection of stereo headphones with a 6.35mm/¼" Jack
plug. Headphones with an impedance of between 32 and 600 ohms are
recommended.
Note: Plugging in headphones will automatically mute the main output and
select a 2-channel stereo down-mix to be created for headphone use.
3
/-
Used to tune FM frequencies and skip presets for the built-in FM Tuner.
4
Mode/Store
Press to cycle between Tuner modes. Press and hold for storing presets (refer
to the 'Operating Instructions' of this manual for more information).
5
Display
Displays the status of the unit.
6
FM tuner
Press to select the built-in FM tuner.
7
BD/DVD
Press to select the source equipment connected to the BD/DVD input.
8
CD/Video 1
Press to select the source equipment connected to the CD/Video 1 Input.
9
Video 2
Press to select the source equipment connected to the Video 2 input.
10
Aux/TV
Press to select the source equipment connected to the Aux input.
With ARC enabled (see later section), press again to select Audio Return
Channel from a suitable TV.
11
Analogue stereo direct
Press to listen directly to the analogue inputs for the current source directly
with no analogue to digital conversion or DSP processing for highest possible
stereo sound quality.
Note: The 351R remembers the audio and video input type and processing
mode for each individual source input. These are recalled each time a source
is selected.
12
Audio input type
Press this button to select between analogue, digital (optical/coaxial) or HDMI
input types as the source of the audio for the currently selected source input.
The choices available depend on the inputs that have been assigned to that
source, see later section.
13
Stereo modes
Press to listen to a source in either digitally processed stereo or stereo and
sub modes.
14
Surround modes
Press to select Dolby Digital or DTS surround modes (with suitably encoded
digital source material), or various Pro Logic II or DTS Neo:6 modes for matrix
encoded analogue or digital material.
15
Info
Press to re-display the current decoding mode.
16
Mute
Press to mute the sound from the main outputs of the 351R. Press again to
cancel mute.
Note: Selecting a new source always cancels mute.
17
Infrared sensor
Receives IR commands from the supplied remote control. A clear, unobstructed
line of sight between the remote control and the sensor is required.
18
Volume
Use to increase/decrease the level of the sound from the outputs of the
351R.
19
Mic input
Used for the CAMCAS auto setup. Use the supplied microphone only!
Front panel connections
1 3 4
6
5
2
7 11
12 13 14 15 16
17
9
18
19
8 10
3