Cambridge Audio AXA35, Руководство пользователя

Страница: 8 / 15

8
Right
speaker
AXA35
CD player
Left
speaker
A1
USB 5V 500mA
Max Power Consumption : 260W
A2 A3 Phono A4 Rec Out
Ground
Gro und
Designed & Engineered in Great Britain
Assembled in China
Left
Loudsp eaker
Righ t
Louds peake r
Left
Loudspeaker
Right
Loudspeaker
AXA35
Integrated Amplifier
Loudspeaker Terminals
Impedance: Nominal 8 ohms
Power AC
Digital O utput
Digital Output
S/P DIF
Co-axial
Designed & Engineered in Great Britain
Assembled in China
Power Rating : 100–240V AC ~ 50/60Hz
Rated Power Consumption: 15W
Line Output
Line Output LineOutput
L
L
R
R
AXC35
Compact Disc Player
Connections
BASIC CONNECTION
The diagram below shows the basic connection of your amplifier to a CD player,
turntable and a pair of loudspeakers.
LOUDSPEAKERS
Check the impedance of your speakers. You can use types with an impedance of 8
Ohms.
The red coloured speaker terminals are positive (+) and the black speaker terminals
are negative (-). Make sure correct polarity is maintained at each speaker connector
or the sound can become weak and “phasey” with little bass.
USING BARE WIRE CONNECTIONS
Prepare the speaker cords for connection by stripping off approximately 10mm (3/8”)
or less of the outer insulation. More than 10mm could cause a short circuit. Twist
the wires tightly together so there are no loose ends. Unscrew the speaker terminal,
insert the speaker cable, tighten the terminal and secure the cable.
Note: All connections are made using standard loudspeaker cable.
USING BANANA PLUGS
We recommend using Banana plugs with our units to establish a secure connection
and ensure there are no loose strands of wire that may cause unwanted noise or
interference.
Once you have stripped the outer insulation of the cable and twisted the wires as
indicated above, securely connect these to your banana plugs, remove the dust cap
from the end of the speaker terminal and push the plug in as far as possible without
applying excessive force.