11
ALVA
TT
ENGLISH
ANTI-SKATING (BIAS) ADJUSTMENT
The bias should be adjusted to match the tracking force. For the
Cambridge Audio Moving Coil cartridge, the bias should be set to 2.
See below diagram.
BLUETOOTH
This product is a Bluetooth transmitter only and transmits high
definition Bluetooth audio. Supports SBC, Qualcomm® aptX™ and
aptX™ HD audio codecs.
Note:
Do not pair this product with your portable devices such as
smartphones or tablets, as these devices are also transmitters.
BLUETOOTH PAIRING
Note:
Before pairing this product, It is highly recommended to
only turn on the Bluetooth device you want to pair and activate its
pairing mode.
To start pairing with your Bluetooth device such as a pair of wireless
Bluetooth headphones, press the Bluetooth paring button located
on the rear of the unit for 2 seconds. Once successful, the Blue
LED will stop flashing and will enter paired mode. Refer to your
Bluetooth device for more information.
BLUETOOTH LED STATUS
Note:
Please make sure that the LED switch is set to 'on' position.
Slowly flashing
– Searching for a paired device.
Fast flashing
– In pairing mode.
Solid
– Paired to a device using SBC codec.
Long solid intervals
– Paired to a device using aptX/aptX HD codec.
REMOVING PAIRED DEVICES
To clear all paired devices, press and hold the Bluetooth pairing
button for approximately 20 seconds. Once successful, the Bluetooth
LED will go off for approximately 3 seconds before reverting back to
'searching' mode.
AP360431 CA0858 USERS MANUAL ARTWORK.indd 11
15/05/2018 11:20 AM
