background image

Incognito 

Multi-Room

Incognito multi-room  

3

Incognito 

multi-room

The  IIncognito  m

multi-rroom  ssystem  iis  aa  w

whole-hhouse  eentertainment

system ccapable oof ddistributing aaudio aand vvideo* tthroughout aa hhome.

The system consists of KP10 keypads with built-in amplifiers

connected to a central AH10 audio hub unit by Cat-5/5e cable.

Source components (CD players, DVD players etc) from almost any

manufacturer can be used and are connected to the AH10 hub unit

by standard stereo RCA /phono leads. Sources connected to the

central hub are distributed to the remote rooms (throughout the

guide referred to as main and sub-zones), so that different rooms

may listen to different things at the same time.

The KP10 keypads are mounted in-the-wall in standard back-boxes

and connected to in-wall, in-ceiling or conventional speakers with

standard speaker cable. The keypads do not require local power and

are powered via the cable from the hub.

The AH10 hub and KP10 keypad utilize A-BUS

TM

technology, and can

be switched between Incognito A-BUS or standard A-BUS mode

(switches located on the underside of the AH10 and rear of KP10

respectively). A-BUS is a standard which provides compatibility

between systems from various manufacturers. When using Incognito

A-BUS mode and our own keypads, some extra features are possible

such as changing sources from the keypad itself and the fitment of

local input modules. When used with other A-BUS keypads it should

be set to standard A-BUS mode or they will not work. 

If video distribution is required a VH10 video switcher can be added

which sends video over RG6 / CT100 co-axial cable to each room

required. Again, different rooms can watch different things at the

same time.

One AH10 hub supports four main-zones and four sub-zones (eight

rooms in total). Each sub-zone output is tied to a main zone output

and always receives the same source as its main zone. Sub-zones

are used for instances such as en-suite bathrooms (the bedroom

being a main zone) where it is desired to to have an area that

automatically follows the same source as another but can be

independently turned on and off, has individual bass and treble etc.  

Up to four AH10 (and VH10 where fitted) can be chained for a

system maximum of 16 main zones plus 16 sub-zones.

Enjoy !

Matthew Bramble

Technical Director

* requires VH10 video switcher 

Incognito is a trademark of Cambridge Audio Ltd. All rights reserved.

A-BUS is a registered trademark of LeisureTech Electronics Pty Ltd Australia

INTRODUCTION

Содержание AH10



























Отзывы: