9
CAMBO
® Wide RS 1200 series
ing block allows the user to take full advantage of the 25mm vertical shift when
mounted on a larger tripod. However, to minimise the size of your camera,
the mounting block can be removed by loosening the two tripod mount screw
knobs. With the mounting block removed you can use the integrated 3/8”
mount in the bottom frame of the main housing.
G2. WRS-333 LEVEL HEAD
The optional WRS-333 level head replaces the original mount. The WRS-333
can be fine-levelled with 3 individual thumb screws, 2 for the horizon and 1
for the perpendicular setting. The camera body can be rotated 360 degrees,
with at the 0 and 180 degrees position there is a indication click. Any position
can be locked with the
rotation lock
. The WRS-333 features a
spigot mount
to
facilitate any spigot accessory of your choice such as lens shades, flags or sun
shades.
H. ACCESSORY MOUNT, VIEWFINDER AND COMPENDIUM
At the top of the camera body features the Cambo accessory mount. The Cam
-
bo accessory modules are mounted using a two-way fixation, which results in
a accurate and stable fixation.
The available Cambo modules are:
• WRS-1060 Apple® Iphone® viewfinder holder
(Iphone® 4 and 4s)
• WRS-1075 Module with an universal accessory shoe mount
• WRS-1080 Optical wide angle (120 degree) viewfinder
(optional masks)
• WRS-1090 Compendium
I. LED LIGHT MODULE
The Wide RS system includes a removable LED light which is convenient for use
in darker environments when reading the distance scale, aperture and shutter
speed. The LED unit attaches to the magnet positioned under the accessory
mount of the camera body.
The LED module can be set to different lighting modes. Standard the LED mod
-
ule is in “demonstration mode”, which means it will turn off automatically after
four seconds. To change the LED module to “constant light mode” press and
hold the button until the light turns off (at least 20 seconds).
Press the button to turn the light ON or OFF. Press and hold to change the
brightness of the LED. The LED unit uses CR-2016 lithium batteries, to replace
the batteries, the housing can be opened at the base by the key ring (note
small notch in key ring hole).
