Cambo Wide DS 38 XL, Основные инструкции по эксплуатации

Страница: 4 / 4

Specifications
Standard Models: Wide DS 38 XL, Wide DS 47 XL, Wide DS 58 XL,
Wide DS 72 XL, Wide DS 6.8/90, Wide DS 5.6/150L
- Weight (with 47mm lens): 1.8 kg
- Size (with 47mm lens, hxbxd): 22,8x21,9x13,3 cm.
- Lens shift all models (including 38mm Schneider):
20mm horizontal left
20mm horizontal right 40mm vertical upward
20mm vertical downward
Both movements are in the body construction, not on the lens panel. Note that the image circle of
the used lens and the film size define the amount of combined shift that is possible.
Lenses:
The Wide DS is designed to be used with the main existing wide lenses. The camera is now
standard prepared for the 38 XL, 47 XL, 58 XL, 72 XL, 6.8/90 and 5.6/150L Schneider lenses. For
other lens solutions contact your Cambo dealer. For the use of all lenses except for the 38 and the
47mm we use modules at the back to get the Ground glass holder at the right position.
Centre Filters:
99945385 Centre Filter for Super Angulon 5.6/38XL
99925637 Centre Filter for Super Angulon 5.6/47XL
99910590 Centre Filter for Super Angulon 5.6/58XL
99925638 Centre Filter for Super Angulon 5.6/72XL
99928300 Centre Filter for Super Angulon 6.8/90
Ground glass holder
The Ground glass holder is based on the 4x5” format and is rotatable except for the compact 38XL
version that is fixed and only useable for this 38XL Schneider lens solution (different height
compared to rotating ground glass holder).
The Ground glass holders can be used with Cambo roll film holders.
Optical Viewfinder
There is a new 120° viewfinder available with the new Wide DS. The new masks are rotatable in
steps of 90°. The viewfinder will contain a circular level through a mirror for hand held levelling.
A special bracket takes the viewfinder to a higher position for vertical use of the Roll film holders
maintaining the maximum amount of vertical shift.
Spirit levels, Fastening eyes, Focusing Cloth bushes, Camera foot, Upside down mounting.
The spirit levels are of a high quality and used in three directions for use of ceiling photography as
well. The camera has fastening eyes for a carrying cord and bushes for the use of a Focusing cloth
as a standard item. The camera has the Quick release base as a standard. The other foot is
optional when only a normal 3/8” connection is used. For extreme (4cm) shift downward the
camera is mounted upside down by using the camera foot with a special filling block mounted on
top of the camera.
This Manual is prepared by Cambo with care, although no responsibility, financial or otherwise, is accepted for any consequences
arising out of the use of this manual or this material. All specifications in this manual are subject to change without notice.
Fotografische Industrie B.V.
P.O. Box 200 8260 AE Telephone: 31(0)38-3314644
Haatlanderdijk 45 8263 AP Telefax: 31(0)38-3315110
Kampen, Holland Email: Cambo@wxs.nl
Cambo R&D 20-03-03