Cambo RPS-SYSTEM, Инструкция по эксплуатации

Страница: 5 / 16

3
1 Warnings
The motorized column features two height adjustable end-stops. When the cross-arm passes one of
these end-stops the drive immediately stops. When positioned correctly these end-stops prevent
collisions between the cross-arm or camera and the baseboard, floor, ceiling or object on the
baseboard.
Before use make sure the cross-arm is positioned between the end-stops.
Before use make sure the end-stops are positioned at the correct height.
o
Place the top end stop at a height that the cross-arm or mounted camera will not be able to
hit the ceiling or any objects hanging from the ceiling before reaching the end-stop first.
o
Place the bottom end-stop well above the floor, baseboard, or objects on the floor or
baseboard. So the cross-arm will reach the end-stop before the mounted camera will collide
with any objects below.
Ensure the cables are guided properly at the back of the column.
Never disconnect the remote from the cable supply during use. This may cause damages to the
electronic components!
Never disconnect the motor unit from the power supply during use. This may cause damages to the
electronics.
The maximum weight that can be applied to the cross-arm at maximum extend is 5KG.