Cambium PTP 670 Series, Руководство пользователя

Страница: 550 / 594

Chapter 7: Operation System statistics
Page 7-63
Figure 249 Wireless Port Counters page (Slave, HCMP topology)
Procedure:
•
Only on a device configured as in HCMP topology as a Master, select one interface using
the Wireless Interface Selector. Note the Remote MAC Address indicates the MAC address
of the unit currently connected, if any, to the selected wireless interface.
• Review the attributes ( Table 222 ).
•
To change the refresh period, update the Counter Page Refresh Period attribute and click
Submit Page Refresh Period.
• To reset all counters to zero, click Reset System Counters.
Table 222 Wireless Port Counters attributes, HCMP mode
Attribute Meaning
Tx/Rx Frames Number of frames transmitted and received over the wireless link.
Rx Frames With Error Number of received frames with errors.
Tx/Rx Frames Q0…Q3 Number of transmitted and received frames for each Traffic Class.
Tx Drops Q0…Q3 Number of frames discarded for each Traffic Class by taildrop.
Main Port Counters page (PTP topology only)
Menu option: System > Statistics > Main Port Counters ( Figure 250 ). Use this page to check the
Ethernet performance of the PSU port. The displayed counters vary depending on which port is
being used to bridge the traffic.