C3VoIP-150 Installation Manual
C3VoIP-150 Installation Manual
4) Voice Mail box Numbers: enter the voice mail box number.
5) DND: If or not enable DND.
Advanced
Setup
WEB
Interface
Settings
Introduction
1) Domain name Mode: Domain name in the SIP URI.
2) Carry Port Information: Port information in the SIP URI.
3) Signal Port: The local port of SIP protocol, default is
5060
.
4) DTMF Type: choose the DTMF type from IN_band,
RFC2833 and SIP INFO.
5) RFC2833 Payload (>=96): User can use the default setting.
6) Register Refresh Interval (Second): The interval between
two normal Register messages. You can use the default setting.
7) RTP Port: C3VOIP-150 selects idle port for RTP if you set
“0”, otherwise C3VOIP-150 use the value you set. Generally
speaking, set “0”.
8) Cancel Message Enable: when you set enable, an
unregistered message is sent before registration, while you set
disable, unregistered message is not sent before registration.
You must set the option for different Proxy.
9) Session Refresh Time: Set the session refresh time.
10) Refresher: Select from UAC and UAS.
11) Prack Enable: To enable or disable prack.
12) SIP Options Enable: To enable or disable sip options.
13) Primary SER Detect Interval: Set the primary server detect
interval.
14) Max Detect Fail Count: The maximum detect fail account.
15) Keep-alive interval (10-60s): the interval that we send an
empty packet to Proxy.
16) Anonymous Call: To enable or disable anonymous call.
17) Anonymous Call Block: If or not enable block anonymous
call function.
18) Proxy DNS Type: Select from A Type and DNS SRV.
19) Use OB Proxy In Dialog: To use OB proxy in dialog or not.
