XD2-230 Installation Guide
5
Zero-Touch Provisioning and Ongoing Management
Most customers employ the XMS management system for initial setup and continuing management. XMS users
can readily set up their new devices for provisioning and ongoing maintenance via the platforms below. Set up
discovery for the subnetwork of your APs, and create and configure a default profile for newly added APs. When
APs are discovered, they are automatically assigned to the XMS default profile and will receive the configuration
defined for that profile. Wait ten minutes after powering up the AP to automatically discover and upgrade it, then
use XMS to view and manage it.
XMS-Cloud—performs zero-touch provisioning. Your new APs appear in XMS even before you receive your
equipment. When the email arrives with your login information, use XMS-Cloud to specify the initial settings
for your APs. A Guided Tour will walk you through the basic steps of creating a profile containing
configuration settings, including creating SSIDs and firewall/application control rules. Once the installed AP
has Internet connectivity, it will automatically contact Cambium Xirrus for cloud-based zero-touch
provisioning per your settings, install the latest applicable license, and upgrade the AP to the latest software
version as appropriate.
XMS-Enterprise—automatically detects and provisions new Cambium Xirrus devices deployed in your
network via a similar provisioning approach. Set up the SSH Users page in the Discovery section, and create
and configure a default profile for newly added APs. After discovery, these new devices automatically receive
the configuration defined in your default profile.
If you are not using XMS, see the
Wireless Access Point User's Guide
to configure XD2 APs manually. The User
Guide is available from
https://support.cambiumnetworks.com
3.
Align the two slots on the back of the AP chassis (circled in red) with
the corresponding tabs on the AP mounting plate.
4.
Push the AP chassis up on the mounting plate tabs and rotate the AP
to the right until it snaps in place.
5.
To secure the AP to the mounting plate for tamper evidence or to
deter removal, feed a customer-provided zip tie or other locking
hardware through the hole in the locking slug and the matching
locking tab on the mounting plate or wall bracket.
6.
Remove the protective plastic film from the unit.
7.
If you need to remove the AP, push it up towards the ceiling and
rotate it to the left.
5
Содержание XIRRUS XD2-230
Страница 1: ...XD2 230 Installation Guide November 2019 ...