Cambium Networks PTP 850E, Руководство пользователя

Страница: 92 / 560

Chapter 4: Unit Management Configuring Trap Managers
phn-3963_008v000
Page 4-9
Figure 39 Trap Managers - Edit Page
3. Configure the trap manager parameters, as described in Table 21 Trap Manager Parameters .
4. Click Apply , then Close .
Table 15
Trap Manager Parameters
Parameter Definition
IPv4 Address If the IP address family is configured to be IPv4, enter the destination IPv4
address. Traps will be sent to this IP address. See
Defining the IP Protocol
Version for Initiating Communications .
IPv6 Address If the IP address family is configured to be IPv6, enter the destination IPv6
address. Traps will be sent to this IP address. See
Defining the IP Protocol
Version for Initiating Communications .
Description • Enter a description of the trap manager (optional).
Admin
•
Select Enable or Disable to enable or disable the selected trap
manager.
Community • Enter the community string for the SNMP read community.
Port • Enter the number of the port through which traps will be sent.
Heartbeat Period • Enter the interval, in minutes, between each heartbeat trap.
CLLI
•
Enter a Common Language Location Identifier (CLLI). The CLLI is free
text that will be sent with the trap. You can enter up to 100
characters.