Cambium Networks PTP 820C, Руководство пользователя, Страница: 273 / 672

Chapter 8: Ethernet Protocols Configuring Adaptive Bandwidth Notification (ABN)
phn-3963_004v000
Page 8-80
12. Click Apply, then Close.
Table 39 describes the status (read-only) fields in the ABN Configuration and Status table.
Table 39 ABN Status Parameters
Parameter Definition
Nominal BW The nominal bandwidth of the link.
Current BW The weighted average of the bandwidth readings taken during
the last Monitoring Interval.
Version The ABN version used.
Editing an ABN Entity
To edit an ABN entity:
1. Select Ethernet > Protocols > Adaptive Bandwidth Notification. The ABN (Adaptive Bandwidth
Notification) page opens (
Figure 178 ).
2. Select the ABN entity in the ABN Configuration and Status Table.
3. Click Edit. The ABN Entity - Edit page opens.
The Edit page is similar to the ABN Configuration and Status – Add page (
Figure 179 ).
However, the Control interface and Monitored interface parameters are read-only, and
additional read-only parameters display the Nominal BW, the Current BW, and the Version.
4. Edit the ABN entity attributes, as described in Adding an ABN entity.
5. Click Apply, then Close.
Deleting an ABN Entity
To delete an ABN entity:
1.
Select Ethernet > Protocols > Adaptive Bandwidth Notification. The ABN (Adaptive Bandwidth
Notification) page opens (
Figure 178 ).
2. Select the ABN entity in the ABN Configuration and Status Table.
3. Click Delete. The ABN entity is removed from the ABN Configuration and Status Table.
Viewing the Statistics for an ABN Entity
To view the statistics for an ABN entity:
1.
Select Ethernet > Protocols > Adaptive Bandwidth Notification. The ABN (Adaptive Bandwidth
Notification) page opens (
Figure 178 ).
2. Select the ABN entity in the ABN Configuration and Status Table.
3. Click Statistics. The ABN Configuration and Status - Statistics page opens.