Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 581 / 1149

Chapter 9: TDM Services and Interfaces Displaying TDM PMs
phn-3965_006v002
Page 9-73
Displaying Native TDM Service PMs
To display PMs for all Native TDM services defined in the system:
1 Select TDM > PM & Statistics > Service . The Services PM page opens.
Figure 340 Services PM Page (Native TDM Services)
2 In the Service field, select a service.
3 In the Interval Type field, select:
o
To display reports in 15-minute intervals, select 15 minutes .
o
To display reports in daily intervals, select 24 hours .
Table 112 describes the Native TDM Service PMs.
Table 112 Native TDM Service PMs
Parameter Definition
ES Indicates the number of seconds during which errors occurred.
SES Indicates the number of seconds during which severe errors occurred.
UAS Indicates the Unavailable Seconds value of the current interval. The value
can be between 0 and 900 seconds (15 minutes).
FC Indicates the number of LOPS (Loss of Packets) events during the current
interval.
Integrity
Indicates whether the values received at time and date of the measured
interval are reliable. An x in the column indicates that the values are not
reliable due to a possible power surge or power failure that occurred at
that time.
To display the PMs in a graph format, click Graph .