Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 466 / 1149

Chapter 8: Ethernet Protocols Configuring G.8032
phn-3965_006v002
Page 8-11
Table 74 lists and describes the parameters in the ERPI Attribute – State page.
Table 74 ERPI State Parameters
Parameter Definition
ERPI Port Identifies whether the row is for the West endpoint, the East endpoint, or a
Sub-Ring connection point.
ERPI Port Active State Indicates whether or not the service point is active for traffic forwarding.
R-APS Channel Forwarding
State Indicates whether the service point is forwarding R-APS messages.
ERPI Data Forwarding State Indicates whether the service point is in unblocked (forwarding) state.
RPL Blocking State Only relevant if the ERPI to which the service point belongs is the RPL owner.
Indicates whether the service point is in blocked state.
ERPI Port Defect State Indicates whether the service point is in Signal Fail (SF) or Signal Defect (SD)
state.
Note: Support for Signal Defect state is planned for future release.