Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 408 / 1149

Chapter 6: Ethernet Services and Interfaces Viewing Ethernet PMs and Statistics
phn-3965_006v002
Page 6-37
6.
Port RX Statistics
The Ethernet Port RX PM report page displays PMs that measure various peak transmission rates (in seconds) and
average RX rates (in seconds), both in bytes and in packets, for each measured time interval.
The page also displays the number of seconds in the interval during which RX rates exceeded the configured
threshold.
This section includes:
•
Displaying Ethernet Port RX PMs
•
Enabling or Disabling Gathering of Port RX PM Statistics per Interface
•
Setting the Ethernet Port RX Threshold
Displaying Ethernet Port RX PMs
To display Ethernet Port RX PMs:
1. Select Ethernet > PM & Statistics > Port RX . The Ethernet Port RX PM Report page opens.
Figure 210 Ethernet Port RX PM Report Page
2. In the Interface field, select the interface for which you want to display PMs.
3. In the Interval Type field:
o
To display reports for the past 24 hours, in 15 minute intervals, select 15 minutes .
o
To display reports for the past month, in daily intervals, select 24 hours .
Table 69 describes the Ethernet RX port PMs.
Table 69 Ethernet RX Port PMs
Parameter Definition
Interval For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
Peak... Average... bytes...
Packets... Various peak transmission rates (per second) and average RX rates (per
second), both in bytes and in packets, for each measured time interval.