Cambium Networks PTP 820 Series, Руководство пользователя

Страница: 380 / 1149

Chapter 6: Ethernet Services and Interfaces Configuring Ethernet Service(s)
phn-3965_006v002
Page 6-9
You can choose to display the following sets of attributes by selecting the appropriate button above the SP
Attributes table:
•
General – See Ethernet Service Points – General SP Attributes Table
•
Ingress – See Ethernet Service Points – Ingress Attributes
•
Egress – See Ethernet Service Points – Egress Attributes
To return to the Ethernet Services page at any time, click Back to Services table at the top of the Ethernet Service
Points page.
a. Ethernet Service Points – General SP Attributes Table
The General SP Attributes table is shown in Figure 192 Ethernet Service Points Page . Table 62 describes the
parameters displayed in the General SP Attributes table.
Table 62 General Service Point Attributes
Parameter Definition
Service point ID This ID is unique within the service. For Point-to-Point and Multipoint
services, the range of values is 1-32. For Management services, the range
of values is 1-30.
When adding a service point, you can select a service point ID from the
available options in the
Service point ID drop-down list in the Ethernet
Service Points – Add page. Once you have added the service point, you
cannot change the service point ID.
Service point name A descriptive name for the service point (optional). The Service Point
Name can be up to 20 characters.