Cambium Networks PMP 450 AP, Руководство по настройке

Страница: 426 / 649

Chapter 3: Operation System information
Page
3-26
Session tab
The Session tab provides information on the SMs or BHS Session Count, Reg Count, Re-Reg Count,
Uptime, Air delay, PPPoE State and Timeouts.
Table 121 Session tab attributes
Attribute Meaning
Subscriber See Table 120 on page 3-24.
LUID See Table 120 on page 3-24.
State This filed displays the status of the registered SM.
Uptime (Downtime) Once a SM/BHS successfully registers to an AP/BHM, this timer is started. If
a session drops or is interrupted, this timer is reactivated once re-
registration is complete.
Session Count This field displays how many sessions the SM/BHS has had with the
AP/BHM. Typically, this is the sum of Registration Requests and Re-
Registration Requests. However, the result of internal calculation may
display here as a value that slightly differs from the sum.
If the number of sessions is significantly greater than the number for other
SMs or BHS, then this may indicate a link problem or an interference
problem.
Registration Requests When a SM/BHS makes a Registration Request, the AP/BHM checks its local
session database to see whether it was registered earlier. If the AP/BHM
concludes that the SM/BHS is not currently in session database and it is valid
Registration Request, then the request increments the value of this field.
In ideal situation, the Registration Requests indicates total number of
connected SMs to an AP.
Note
The user can clear Registration Requests by dropping all
current sessions of SM (or BHS) from Configuration > Tools >
Sessions menu.