Cambium Networks ePMP, Руководство по установке

Страница: 14 / 15

CAMBIUM NETWORKS
14
Typical connectorized radio deployment
An ePMP connectorized radio site typically consists of a high supporting structure such as a mast, tower or
building for the radio, and an equipment building or moisture-proof enclosure for the indoor equipment
(power supply, Cluster Management Module), as shown here in a typical mast or tower installation. If the
radio/antenna is to be mounted on a metal tower or mast, then in addition to the general protection
requirements (see section
Safety ), the following requirements must be observed:

The equipment must be lower than the top of the tower or its lightning air terminal.

The metal tower or mast must be correctly grounded.
Surge
Suppressor
External
ground bar
Ground ring
Outdoor CAT5e cable: shielded
with copper-plated steel
Equipment building
AP
Ground Cable
Tower/building ground system
Cat5e cable
Port “Gigabit
Data +
Power”
Network
switch
Port “Gigabit
Data”
Power
supply
To power
mains
Note
The Cambium 600SSH surge suppressor may be used for 10/100 Mbit Ethernet deployments. For 1000 Mbit
(Gigabit) Ethernet deployments, the following surge suppressors must be used:
Manufacturer Part Number Description
L-COM AL-CAT6JW Outdoor 10/100/1000 Base-T CAT6 PoE Compatible Lightning
Protector – RJ45 jacks
L-COM AL-CAT6HPJW Outdoor 10/100/1000 Base-T CAT6 Hi-Power Lightning Protector –
RJ45 jacks