Hardware Overview
32
V5000 pole mount bracket
1. Pass the long screws through the bracket body. The screws locate in the recess in the bracket.
2. Fit two flanged nuts to the long screws on the back of the bracket. Tighten using a 13 mm spanner.
3. Fix the bracket to the back of the radio using the four short M6 bolts, ensuring that the arrow in the
plate points towards the top of the radio. Tighten the four bolts to a torque setting of 5.0 Nm (3.7 lb
ft) using a 13 mm spanner or socket.
4. Attach the pole-mount bracket to the pole using the clamp and the remaining flanged nuts. Adjust
azimuth and tighten the nuts to 10 Nm (7.4 lbft) using a 13 mm spanner.
