Cambium Networks cnPilot Home R200 Series, Руководство пользователя

Страница: 25 / 136

Overview
pmp-0884 (September)
1-9
cnPilot Home devices may be configured by navigating the unit’s voice menu. By using your phone and dialing a
sequence of commands, the device may be configured for operation. Each device configuration section may be
accessed by entering a certain operation code, as shown below.
Table 6 Voice Menu Setting Options
Operation
Menu Navigation code
1
WAN Port
Connection
Type
1.
2.
3.
Pick up phone and press “****” to start IVR
Choose “1”, and cnPilot Home R200x/R201x reports the current WAN port connection type
Prompt "Please enter password”, user needs to input password and press “#” key, if user
wants to configuration WAN port connection type.
The password in IVR is same as web management interface login, the user may use phone
keypad to enter password directly
For example: WEB login password is “admin”, so the password in IVR is “admin”. The user
may “23646” to access and then configure the WAN connection port. The unit reports
“Operation Successful” if the password is correct.
4. Prompt "Please enter password”, user needs to input password and press “#” key if user
wants to configuration WAN port connection type.
5. Choose the new WAN port connection type (1) DHCP or (2) Static
The unit reports “Operation Successful” if the changes are successful. The cnPilot Home
device returns to the prompt “please enter your option …”
6. To quit, enter “*”
2
WAN Port IP
Address
1.
2.
3.
Pick up phone and press “****” to start IVR
Choose “2”, and cnPilot Home R200x /R201x reports current WAN Port IP Address
Input the new WAN port IP address and press “#” key:
Use “*” to replace “.”, for exampleuser can input 192*168*20*168 to set the new IP address
192.168.20.168
4. Press # key to indicate that you have finished
Report “operation successful” if user operation is ok.
5. To quit, enter “**”.
3
WAN Port
Subnet Mask
1.
2.
3.
Pick up phone and press “****” to start IVR
Choose “3”, and cnPilot Home R200x /R201x reports current WAN port subnet mask
Input a new WAN port subnet mask and press # key:
Use “*” to replace “.”, user can input 255*255*255*0 to set the new WAN port subnet mask
255.255.255.0
4. Press “#” key to indicate that you have finished
Report “operation successful” if user operation is ok.
5. To quit, enter “**”.