Model:
e410
The e410 can be mounted to a 14mm width T-bar rail
using the clips built into the underside of the unit.
The e410 can be mounted on any surface by attaching
the rubber feet to the underside of the unit.
24mm T-Bar Rail Mounting
Wall Mounting
Rubber feet Assembly
Introduction
The guide provides a quick installation process.
Tool Requirements
38mm T-Bar Rail Mounting
The e410 mounts to a ceiling tile and allows for the
ethernet cable to be hidden by routing through a hole in
the ceiling tile.
• Philips Screwdriver
Ceiling Tile Mounting
community.cambiumnetworks.com
JOIN THE CONVERSATION
Product Overview
Package Contents
e410 Access Point
Ceiling Mounting Screws
(Qty. 4)
POE Injector*
Rubber Foot
(Qty. 4)
The e410 mounts to any wall by using two screws with
corresponding wall anchors.
Ceiling Mounting Bracket
Wall Mounting Kit
(Qty. 2)
Power Cord*
cn
Pilot
TM
(
410
,QGRRU
802.11ac Wave2 Indoor
Access Point
Quick Start Guide
Mounting Plate
Tools Required
Multi-color LED
Top View
Mounting Plate
Ceiling Tile
Mounting Bracket
Screws x4
Exploded View
38mm wide T-bar rail
Mounting Bracket
Ceiling Tile
The e410 can be mounted to a 24mm width T-bar rail
using the clips built into the underside of the unit.
24mm wide T-bar rail
Ceiling Tile
14mm T-Bar Rail Mounting
Ceiling Tile
14mm wide
T-bar rail
* Only available for certain ordering SKUs
Desk Mount Foot
T-bar Mount Holder
Reset Button
LAN Port
Removable Clip
Wall Mount Anchor
Bottom View
Kensington
Lock Slot
Cable Route Hole
The e410 is secured to a 38mm ceiling T-bar rail by using
the ceiling mount bracket.
118mm
