cnMatrix EX1K Basic Configuration Guide
Copyright 2021 Cambium Networks. All rights reserved. (v1.2)
26
Electrical Safety Information
This switch is designed with a power inlet with an integrated ground. A power cord from the switch shall be
connected to a power outlet with ground connection.
The equipment is designed for indoor installation and not intended to be connected to exposed (outside) networks.
Equipment intended for installation in Information Technology Equipment Rooms. "Suitable for installation in
Information Technology Rooms in accordance with Article 645 of the National Electrical Code and NFPA 75."
To avoid a shock hazard:
Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this
product during an electrical storm.
Connect power cord to a properly wired and grounded electrical outlet.
Connect to properly wired outlets any equipment that will be attached to this product.
When possible, use one hand only to connect or disconnect signal cables.
Never turn on any equipment when there is evidence of fire, water, or structural damage.
There are no serviceable parts inside this equipment. Service should be provided only
by a qualified service technician.
Le switch est conçu avec une prise de courant possédant une connexion à la terre. Un cordon d’alimentation devra
être connecté à la prise de courant possédant une connexion à la terre.
L’équipement est prévu pour des installations en intérieur et n’est pas prévu pour être installé à l’extérieur.
CAUTION: The SFP/SFP+ ports should use UL listed Optical Transceiver product, Rated Laser Class I. 3.3Vdc.
Si le transceiveur optique n'est pas livré avec l'appareil, le manuel d'utilisation doit comporter la description ci-
dessous ou son équivalent :« Ce produit est destiné à être utilisé avec un transceiveur optique homologué UL,tension
DC3.3V, classe laser I.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
To prevent loss of life or physical injury, observe the following safety guidelines. In no event shall
Cambium Networks be liable for any injury or damage caused during the installation of the switch.
