10
8
SIM
C
ARD
R
EPLACEMENT
T
HE
VT2500
MUST BE POWERED OFF AND SHOWING NO ACTIVITY ON THE
LED
S BEFORE YOU
ATTEMPT TO REPLACE THE
SIM
CARD
8.1
I
TEMS
R
EQUIRED
You will need the following:
•
Replacement SIM Card (This must be supplied via Camatics)
•
Torx Screwdriver
8.2
I
NSTRUCTIONS
1.
Unscrew the screw holding the protective cap to the end of the VT2500
2.
Pull the protective cap away from the end of the VT2500
3.
Push the SD card in so that it clicks and releases
4.
Pull the SIM card out of the VT2500 and put it aside
5.
Push the new SIM card into the VT2500 until you hear it click, it should sit flush with the casing
6.
Place the protective cover back over the end of the VT2500 and use the screw to secure it in
place
7.
Power on the VT2500 and wait 5 minutes to ensure the new SIM card is working and has been
detected.
