8
5. Click CONNECT button
6. CO2 concentration being displayed on CAM can be monitored. If the CO2 level in ppm
does not respond, it is either because the wrong COM port number was selected in
“Settings” or the USB driver was not properly installed. Try selecting each of the different
COM ports under settings. If none of them work, you should unplug the CAM, uninstall the
USB drivers, and repeat Part 1 again.
7. To enable data logging, click “Setting”, then check “Enable data logging” and select a path
to save the log file. It will be in an ASCII text format LOG***.CSV suitable for easily
importing into a database or spreadsheet.
NOTE: The LOG file will not be created until you set the Year/Month/Date on the
CAM and give a valid date range under “terms” under Settings.
8. Click “Exit”, when you want to finish the program
[1]Click
”CONNECT”
Click “EXIT”
