10
OSD Control Key
11
TROUBLESHOOTING
> SET Key: Access to the menu or confirm the setting.
To enter the main menu, press the Set Key down once.
> UP/DOWN Key : Choose the desired sub-menu.
> LEFT/RIGHT Key : Set up the value of the selected menu.
Used to adjust the desired menu selection, and to move the cursor left or right.
Possible Problems & Solutions
• Nothing appears on the screen.
-Check the power connections and power supply is functioning.
-Check the video signal line connections.
-Check, and make sure, that the lens mode is set to DC (VIDEO) when using a
VIDEO (DC) lens.
• The video image is not clear.
-Clean the lens with a soft lint free clean cloth.
-Adjust so the camera is not facing directly toward a bright light source.
-Move the camera if necessary.
-Re-adjust the back-focus of the camera.
• The screen is dark.
-Adjust the contrast feature of the monitor.
-If there’s an intermediate device, set the 75
Ω
/Hi-Z properly; check termination.
-Check if an auto iris lens is being used and adjust the brightness level.
• The MOTION DETECTION function is not working
-Check if “MOTION DETECTION” mode is turned on in OSD menu.
-Check if the MD Sensitivity is too low.
-Check the setting of the MD AREA.
• The WDR function is not working
-Check if the WDR Level is too low.
-Check if the AE Mode is set to MANUAL. The WDR doesn’t work in MANUAL
Exposure mode.
• Colours are not quite right.
-Check if the camera is facing directly into sunlight or fluorescent light.
-Check if an auto iris lens is being used.
-Check, if applicable, the connection of the lens connector cable.
• The Day & Night function doesn’t work.
- Check if the mode is set to something other than Auto mode.
- Check the Day < > Night LEVEL.
TROUBLESHOOTING
If there are problems in operation, refer to the possible solutions below.
If the problem persists, please contact the distributor you purchased this product from.
