Calyx FEMTI, Инструкция по эксплуатации, Страница: 7 / 17

7
3 AC-Inlet
Insert the supplied power cord into this connector and plug the other end into a wall AC
outlet.
WARNING
WARNING
4 Output Mode Selector
This switch selects the speaker output mode.
S :
Stereo Mode (Refer to page 8.)
M :
Bi-Wiring Mode (Refer to page 9.)
B :
Bridged Mono Mode (Refer to page 10.)
5 Input
Connect the RCA cables from your source unit to RCA input terminal.
M / B IN
:
M / B IN
(or ’L’) is used as input when selecting Bi-Wiring or Bridged Mono Mode
6 Speaker Output
Connect the speaker cables from your speaker to speaker output terminal.

Do not use the unit with any other than the supplied power cords.

The shape of the AC inlet and the plug of the supplied power cord depend on the
voltage rating and destination country. Using any other type of cable except the
supplied power cord poses the risk of fire and damage.

This product is available in version for 100V~120V, or 210~230V AC. Make sure that
the voltage shown on the rear panel matches the AC line voltage in your area.

Do not open the unit, as this involves a severe risk of electric shock.

If the unit does not operate, the internal fuse may have blown. Never attempt to
replace the fuse yourself. Be sure to contact your Calyx dealer or an authorized
service station.