•
NMEA 0183 Wi-Fi server failure
: make sure your NCP and your PC/mobile
are in the same Wi-Fi network and you are connecting the right IP and
server port.
If your PC/mobile is connected to the NCP Access point (section 5.7), the
IP address of the NCP is 192.168.4.1.
If you have configured the NCP to connect your Wi-Fi Network, check the
NCP Wi-Fi Configuration is correct, see section 8.1. In this case the NCP IP
address is the one set in ‘Configuration page’.
The NCP server port is the one configured in ‘Configuration page’, NMEA
WIFI IP PORT.
To check your PC can access the NCP IP address, you can open the
command interface (In Windows search “cmd”
on the Start taskbar search
field or Start screen, when open, input the
ping IP_addr
command, where
the IP_addr is your NCP IP address, press enter and analyze reply to the
ping command is received)
