Battery level
Wind data
·Speed
·Direction
9/13
ULTRASONIC Portable Solar
User manual
5. Installation
5.1. Installing the unit
The Ultrasonic Portable has to be oriented to the bow
taking as reference the mark that appears at the top (as
shows at the image below).
It comes with a threaded lower part (16 mm M16×2
female thread) that can be adapted to your available
accessories.
Bow reference
*Please check our available accesories on our website.
Install the unit in an area where wind reaching the unit is
not obstructed by any other object. It should have an
unobstructed radius of 2-3 meters.
5.2. Installing the App and testing the unit
Follow the next steps:
1. Make sure your device is BLE compatible*.
· Ultrasonic Portable works with Android 4.3 or 4.4 or iOS
devices (4s, iPad2 or beyond).
2. Download and install
Anemotracker App
on your device
from Google Play or Apple Store.
3.
Once the App is installed, start it and open the settings
menu by sliding the screen to the right.
4. Press the button “Scan” and all Ultrasonic Portable
devices within the range should show up at screen.
5. Select your device and connect.
If your device connects with the Ultrasonic Portable
correctly, continue with the normal installation.
If not, please read the following lines.
Your device is compatible but you can not connect?
1. Make sure BT (Bluetooth) mode is running on your
smartphone, Tablet or PC.
2. Make sure Ultrasonic Portable is not on Off mode. If the
device has not been exposed to any source of light for an
extended period of time it might be necessary to keep it
under direct sunlight for a few hours. A cloudy day will
work too.
4. Make sure no other device is linked to your Ultrasonic
Portable.
Each unit can only be connected to a single device at a
time. As soon as it gets disconnected, Ultrasonic Portable
is ready to link to any other device with the Anemotracker
app installed.
For further information please contact Calypso Technical
Support.
