Manuale Uniflam Idro rev. 00
7
2.2. Performance features
The following table shows the specifications of our products in accordance with the provisions of
the standards (UNI EN 13240 and subsequent updates)
Main technical features
Uniflam IDRO 25 kW – (without oven)
Uniflam IDRO 34 kW –(without oven)
Dimensions
1050 x 580 x 570 mm Dimensions
1050 x 780 x 570 mm
Global heating power
Output heating power
Heating power to the ambient
Heating power to the water
Boiler capacity
Max operating water pressure
Max boiler temperature
Efficiency
Average fuel consumption
25 kW
19 kW
3 kW
16 kW
28 lt
1.5 bar
75 °C
76 %
7 kg/h
Global heating power
Output heating power
Heating power to the ambient
Heating power to the water
Boiler capacity
Max operating water pressure
Max boiler temperature
Efficiency
Average fuel consumption
34 kW
25.8 kW
4 kW
21.8 kW
38 lt
1.5 bar
75 °C
76 %
8 kg/h
Max heatable volume
450 m
3
Max heatable volume
620 m
3
Boiler connection Ø
3/4"
Boiler connection Ø
3/4"
Uniflam IDRO 25 kW – with oven)
Uniflam IDRO 34 kW – ( with oven)
Dimensions
1540 x 580 x 570 mm Dimensions
1600 x 780 x 570 mm
Global heating power
Output heating power
Heating power to the ambient
Heating power to the water
Boiler capacity
Max operating water pressure
Max boiler temperature
Efficiency
Average fuel consumption
Oven max temperature
25 kW
19 kW
3 kW
16 kW
28 lt
1.5 bar
75 °C
76 %
7 kg/h
250 °C
Global heating power
Output heating power
Heating power to the ambient
Heating power to the water
Boiler capacity
Max operating water pressure
Max boiler temperature
Efficiency
Average fuel consumption
Oven max temperature
34 kW
25.8 kW
4 kW
21.8 kW
38 lt
1.5 bar
75 °C
76 %
8 kg/h
250 °C
Max heatable volume
450 m
3
Max heatable volume
620 m
3
Boiler connection Ø
3/4”
Boiler connection Ø
3/4”
3. INSTALLATION (see section with the installer)
ATTENTION: Please note that the installation of the product has to be done in conformity to all
national laws and local rules and regulations.
Following some simple advices for the installation of our products in accordance to the standards (UNI
10683, UNI 10412, UNI 7129 and subsequent updates).
3.1
Installation of the product
Before installation it has to be checked if the floor is able to resist the weight if the heater, ready for
use (thus also including the heat transfer fluid).
Make sure that the walls around the stove are not made flammable material and are not sensitive to
heat.
