12
www.calumetphoto.com
© CALUMET PHOTOGRAPHIC, INC. 2007
3.2.5 Aperture priority mode
•
Select
f
with the function buttons
•
Set the desired aperture with the value buttons. The intermediate
1/10 stop values stored from the last measurement appear when
the aperture is preset. These are not valid, because the valid and
actual 1/10th stops will only appear after the next meter reading is
taken.
•
Measure by pressing the measuring button
M
•
The measured shutter speed appears in the right-hand digital display
Automatic adaptation of the aperture in 1/10 stops to the measured shutter speed
•
Select other paired aperture/shutter values with the value buttons.
3.2.6 Exposure value EV
•
Select
EV
with the function buttons
•
Measure by pressing the measuring button
M
The measured exposure value appears in the left-hand digital
display (accuracy: 1/10 stops) and the aperture as a rounded-off
mark on the analog aperture scale
•
Select with the value buttons other paired aperture/shutter speed values corresponding with this
exposure value.
