<
All rights reserved.No spreading abroad without permission of Caltta
>
10
low-power mode.
Disable
The repeater has been disabled.
2 BASIC OPERATIONS
2.1Power on/off Repeater
AC Power Supply
：
When the repeater is turned off,press the AC Power Switch “
” on the rear panel to turn on, the
light of AC power indicator is on. Then press the Button “
” on the front panel to power on the
repeater, Power Indicator ”PWR” is on. After the repeater working normally, operation screen shall
be displayed on the LCD.
When the repeater is turned on, press the Button “
” to turn off the repeater directly, and press
AC Power Switch “
” to power off.
DC Power Supply
：
When the repeater is turned off, press the Power on Button “
” on the front panel to power on
the repeater, Power Indicator ”PWR” is on. After the repeater working normally, operation screen
shall be displayed on the LCD.
When the repeater is turned on, press the Power on Button “
” to power off the repeater directly.
2.2Voice and Data Transfer
When transferring, the Data Transfer Indicator“Data” is on. If the transferred data is analog, the
Analog Working Mode Indicator”Ana.” is on simultaneously. If the transferred data is digital, the
Digital Working Mode Indicator”Dig.” is on simultaneously. The working parameters of each
channel,such as TX/RX frequency and CDCSS/CTCSS can be assigned by distributor.
An analog channel can be programmed with one group of CDCSS/CTCSS encoding and decoding
