Function:
-PTT function
Operation
Power on
In power off state, press
PTT button
and hold it for about3 seconds, release the button, blue
indicator will flash slowly to indicate power on successfully.
Power off
There are two methods for power off operation.
1.
The remote controller will automatically power off after Bluetooth adapter switched off 5mins
latter.
2.
Use the USB charging cable connect with power, charging the remote controller, the remote
controller will reset and power off.
Remote control matching
Pairing with Bluetooth adapter
①
Place the AH300 remote controller and the Bluetooth
adapter in a visible area within 1 meter range.
②
Make sure the Bluetooth remote controller is in power
off state.
③
In USB charging power off state press and hold
PTT Button
for about 8 seconds or in power on
idle state press and hold
PTT Button
for 16 seconds, when the Blue LED and the Red LED flashing
alternately, release the button then the AH300 remote controller is in pairing state.
④
On the power off state of radio, press Bluetooth adapter
“
on/off
”
button until the LED light
flash red and blue alternately quickly, then short press the
“
power on/off
”
button once ,after
