Calspas Platinum Plus, Руководство пользователя

Страница: 34 / 60

2018 Platinum Series Spas
LTR20181010, Rev. H
W
ater Clarity
www.calspas.com
32
Maintaining the Bromine Level
Intelligent Controller Codes for the Bromine Generator
Always keep your spa or hot tub water in balance.
Maintaining the pH and the alkalinity is part of being
a spa owner.
The bromine generator requires you to determine
your power setting based upon your circulation
time and your spa usage. It requires a minimum of
eight hours of circulation per day. If the spa is not
circulating, the bromine generator is not generating
bromine. If you find that you are having trouble
maintaining the desired level, make sure the spa is
circulating the required amount.
A spa that is frequently used will require a higher
power setting. If you have a bromine reading that
is too high or too low, adjust the DECREASE /
INCREASE control accordingly. Depending on the
amount usage, circulation time, and type of spa,
each spa owner’s setting will be different.
The bromine generator can go up to 12 months
before a drain and fill is required, unlike non-
equipped spas that require it every three months.
This is because the bromine generator does not
add unwanted chemical bi-products like traditional
chemicals do.
Sodium bromide is not the only contributor to the
TDS count in your water. Over time, the TDS count
in your water will rise (from such things as residuals
from other chemicals and minerals, and unfilterable
material). Test the TDS every few months to make
certain it stays within range.
Shower prior to entering any hot tub or spa. This will
help prevent phosphate contamination and reduce
the demand on the bromine.
Shocking your tub is recommended after heavy
bather load.