Sauna Owner’s Manual
Operating Your Sauna
www.calspas.com
3.
With the digital display flashing, press the ‘Time/Temp Set’ button to decrease the time 5 minutes.
NOTE: Each time you press the button, the time will decrease 5 minutes.
4.
To increase the time, wait 4 seconds until the display stops flashing; repeat Step 2 through Step 4.
NOTE: Each time you depress the button, the time will increase in five minute increments, to a maximum
of 60 minutes.
Turning the Infrared Heaters and Room Light On/Off
1.
Pressing the ‘Heat/Light’ button once turns the heaters and the room light on.
2.
Pressing the ‘Heat/Light’ button again turns the heaters and room light off.
Default Temperature:
120˚F
Default Time:
60 Minutes
High Limit Device
This system has a built-in high limit control, which automatically turns off the system if the temperature
inside the room rises to an abnormally high level. If the “OH” (overheated) appears on the control screen,
this indicates that the system overheated. To restart, let the system cool, then press the ‘On/Off’ button on
the control panel to reset the system.
Page 24
12/17/04
Содержание Cal Heat IR-100
Страница 4: ...This page intentionally left blank ...
Страница 45: ......
Страница 46: ......
Страница 47: ......