Calrec OMEGA, Руководство по установке

Страница: 20 / 70

20 Omega
with Bluefin
raCk speCIfICatIOns
It is recommended that all equipment
over 8 Kg (17.5 lbs) in weight, or over
150 mm (6 inches) deep is mounted
into equipment bays which offer me-
chanical supports under each of the
units. This will allow units to be sup-
ported as they slide forward during
removal for maintenance purposes.
Equipment can be mounted in separate
enclosures. Please refer to the cable
lengths table when planning this and
discuss the lengths being provided with
the Calrec project engineer involved with
your console.
The Processing rack has a fan tray built
into it, which incorporates a baffle such
that warm air is sucked up out of the rack
and out through the rear of the fan tray.
A vent in the front of the fan tray allows
ambient air to enter. The baffle deflects
this air up into the rack above. The bottom
rack should not be positioned above any
equipment producing significant heat.
* Note: Unit has handles protruding approx. 1.3” (32 mm) from the surface of the front panel.
* For longer distances, the control surface requires a local power supply.
** For longer distances, custom made cables can be provided.
Item Height
Approx depth
(incl. mating
cons)
Approx
weight
Approx
Power
Output (W)
(full load)
Approx AC Power (VA)
(full load)
inches mm lbs kgs
Bulk Power Supply and Distribution
rack with one PSU
3U 15 380 26 11.8 600 750
Additional Plug-in PSU (Hot Spare) - - - 8.0 3.65 No extra Less than 5% extra
Processing Rack (Unpopulated) 7U 19.7 500 29.5 13.4 - -
Processing Rack (Populated) 7U 19.7 500 42.3 19.2 - -
PC* 3U 23.7 600 27 12.2 - 400
Hydra Gigabit Interface Unit 1U 11.9 300 6 2.7 - -
MADI Unit 1U 11.9 300 7 3.2 - -
Multi-Rail PSU * 1U 18.1 460 9.3 4.23 - -
Additional Multi-Rail PSU Hot spare 1U 18.1 460 9.3 4.23 No extra Less than 5% extra
Cables From To
Maximum Length
Feet Metres
Control Surface PC 492 150
Control Surface Processing Rack 492 150
Control Surface * Bulk Power Supply & Distribution Unit
24/32 Faders -492
40 Faders - 459
56 Faders - 394 24/32 Faders - 150
40 Faders - 140
56 Faders - 120
Processing Rack Bulk Power Supply & Distribution Unit 16.5 5
Processing Rack PC 98 30
Processing Rack BNC I/O Interface Panels (Digital) 16.5 5
Processing Rack XLR I/O Interface Panels (Digital) 9.8 3
Processing Rack** EDAC I/O Interface Panels (Analog) 16.5 5
Processing Rack MADI Unit 16.5 5
Processing Rack Hydra Gigabit Interface Unit 16.5 5
MULTI-RAIL PSU #2
(OPTIONAL HOT SPARE)
MULTI-RAIL PSU #1
PROCESSING RACK
(CONTAINS ALL I-O, DSP
AND CONTROL
PROCESSING HARDWARE)
OPTIONAL MADI
INTERFACE UNIT
OPTIONAL HYDRA GIGABIT
INTERFACE UNIT
5 3 2 9 N Z
-17A +7A5 +7L5 +48V +17A 24V OUT 24V IN FAN FAIL
5 3 2 9 N Z
-17A +7A5 +7L5 +48V +17A 24V OUT 24V IN FAN FAIL
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
BULK POWER SUPPLY
AND DISTRIBUTION
UNIT (HOLDS UP TO 3
PLUG-IN PSUS)
100 %
80 %
60 %
40 %
20 %
FAN
DCG
OK
ZN5526
24V PSU
ZH5527
2
1
AUXILARY
24V OUTPUTS
RW5537
RESET RACK
100 %
80 %
60 %
40 %
20 %
FAN
DCG
OK
ZN5526
24V PSU
100 %
80 %
60 %
40 %
20 %
FAN
DCG
OK
ZN5526
24V PSU
PC
POWER FAN FAIL
MS CF / MD
USB
Power
Power
Reset
I O
DVD ROM
HDD
USB
USB
U
© Calrec Audio Ltd
All Rights Reserved
3067-10-1A4
Standard Rack
Layout
Omega
01/03/07
J Cunningham
Title:
Project:
Issue date:
Drawn:
Calrec Audio Ltd
Nutclough Mill
Hebden Bridge
West Yorkshire
HX7 8EZ
Tel: 01422 842159
Fax: 01422 845244
www.calrec.com
enquiries@calrec.com