manualshive.com logo in svg

Calrec Artemis, Руководство оператора

Операторский мануал Calrec Artemis доступен для бесплатного скачивания с manualshive.com. Узнайте все о функциях и настройках этого продукта, изучив подробное описание в руководстве пользователя. Скачайте мануал прямо сейчас, чтобы максимально эффективно использовать вашу аппаратуру.

Поделиться
Скачать
background image

74    ARTEMIS 

Digital Broadcast Production Console

Processing Audio

The Expander in Dynamics 1 can be 
switched to perform as a Gate by pressing 
the Gate button in the 4th control cell of 
the bottom control row.

Processingorder

Buttons on the TFT screen allow each 
dynamics unit to be selected to operate 
post fader, pre fader (post EQ) or pre EQ 
(pre fader). 

Dynamicsmetering

In addition to the gain reduction meters 
shown in the panel mode TFT area which 
show the status of the currently assigned 
path, dynamics gain reduction meters 
are also displayed for each path in the 
upstand metering area above.  These 
upstand meters can be switched between 
displaying Dynamics 1 and Dynamics 2 
using the panel TOOLS>METERS menu 
found in the layers row, to bring up the 
options in the functions row above.

Dynamics gain reduction meters light 
upwards, away from the zero point, in 
a red colour to indicate the amount of 
gain reduction being applied due to 
compression.  Where expander/gates 
are available (Dynamics processor 1), the 
same meter bar will light downwards, away 
from the central zero point, in a green 
colour to indicate gain reduction due to 
gating or expansion.

If a surround master is the currently 
assigned path on the control surface, the 
panel mode area of the TFT will display 
gain reduction bar graphs for each of 
the surround elements.  In addition, ‘C’ 
& ‘S’ indicators above each meter show 
whether each surround element has 
dynamics control and/or gain reduction 
independence from the surround master.

Side-chainEQ

The ‘SC EQ ON’ button in the 8th control 
cell of the bottom row of the dynamics 
control section is used to switch side-
chain EQ in and out.

Pressing the sidechain ‘LISTEN’ button in 
the same cell allows the user to listen to 
the effect that the sidechain EQ is having 
on the signal.  As with regular EQ bands, 
you can select various response types by 
pressing RESP and turning the related 
shaft encoder.  The remaining controls 
change according to the response chosen

The EQ response curve for the side-chain 
can be viewed by selecting SCEQ ON 
from the TFT screen on the left of the EQ 
curve or from the panel as described.

AboutDynamicsSide-chain&EQ

All Dynamics 1 processors have optional 
side-chain EQ.  Channels have 2 bands of 
SCEQ, whilst Groups and Mains have a 1 
band of SCEQ.

The side-chain is an offshoot from the 
audio path through the Channel, Group 
& Main outputs.  Dynamics processors 
use the side-chain to determine the audio 
level and then apply gain reduction to the 
‘through’ audio path.  Side-chain audio 
is not passed on, it is used purely as a 
reference for dynamics processors.

Applying EQ to the side-chain does NOT 
change the relative frequency response 
of the audio path though the console, only 
the audio that ‘triggers’ the dynamics.

By applying EQ to the side-chain you can 
tune the dynamics to act on or ignore 
peaks depending on the frequency.       
For example, a basic ‘De-Esser’ used 

to reduce sibilance is a compressor 
with a high pass filter on the side-chain. 
The compressor only receives the high 
frequency content and will therefore only 
apply gain reduction if high frequency 
content exceeds the threshold setting.

DynamicsLinks

The compression gain reduction level 
of multiple paths can be bused together 
using dynamics links.  Paths that share 
a common dynamics link, will all get the 
same amount of gain reduction applied.

If the signal level on a path, combined with 
the path’s compression settings causes it 
to apply gain reduction, the same amount 
of gain reduction will be applied to all 
other paths using the same dynamics link, 
irrespective of their own audio content 
and compression settings.

If multiple paths are triggering 
compression, the gain reduction across 
the linked group will be the same as 
whichever path is compressing the most. 

For example, if the settings and audio 
level of one path causes its compressor to 
apply 5dB of gain reduction, and another 
path is causing 10dB of reduction, all the 
paths in the group will have their signals 
reduced by 10dB. 

When Expander/Gate units are part of a 
dynamics link and one feed within the link 
reaches the threshold level to open the 
expander/gate, all expander/gates within 
the link open regardless of the levels of 
their feeds.

Fig 2 shows the available parameters for 
the Dynamics Processors.

Содержание Artemis





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Artemis

TC Electronic Viscous Vibe User Manual preview
Viscous Vibe
Бренд: TC Electronic Страницы: 27
TC Electronic SHAKER VIBRATO User Manual preview
SHAKER VIBRATO
Бренд: TC Electronic Страницы: 13
TC Electronic DITTO X2 LOOPER Quick Start Manual preview
DITTO X2 LOOPER
Бренд: TC Electronic Страницы: 2
TC Electronic corona User Manual preview
corona
Бренд: TC Electronic Страницы: 2
Altrad Balde Descarga 300 Instruction Manual preview
Balde Descarga 300
Бренд: Altrad Страницы: 13
Mad Professor LITTLE GREEN WONDER Owner'S Manual preview
LITTLE GREEN WONDER
Бренд: Mad Professor Страницы: 2
DigiTech PedalVerb PDS3000 Reference Manual preview
PedalVerb PDS3000
Бренд: DigiTech Страницы: 12
Midas VeniceF16 Quick Start Manual preview
VeniceF16
Бренд: Midas Страницы: 5
Qu-Bit Electronix Tri-ger Manual preview
Tri-ger
Бренд: Qu-Bit Electronix Страницы: 13
Kasanova IDE002341NOC Instruction Manual preview
IDE002341NOC
Бренд: Kasanova Страницы: 22
Nady Audio MXE-1212 Owner'S Manual preview
MXE-1212
Бренд: Nady Audio Страницы: 15
Onerr Digital Reverb DGR-1 User Manual preview
Digital Reverb DGR-1
Бренд: Onerr Страницы: 11
digico DQ-Rack User Manual preview
DQ-Rack
Бренд: digico Страницы: 23
Mad Professor Loud'n Proud Owner'S Manual preview
Loud'n Proud
Бренд: Mad Professor Страницы: 2
Studer OnAir 2000M2 Operating And Service Instructions preview
OnAir 2000M2
Бренд: Studer Страницы: 449
Amptweaker BigRock Pro Manual preview
BigRock Pro
Бренд: Amptweaker Страницы: 4
GPX HM102B User Manual preview
HM102B
Бренд: GPX Страницы: 2
KitchenAid 3 Speed Classic Blender Operating Instructions And Recipes preview
3 Speed Classic Blender
Бренд: KitchenAid Страницы: 63

Бренды по названию

Популярные бренды

Загрузить еще бренды