Calrec ARGO, Инструкция по установке и техническому обслуживанию

Страница: 63 / 92

63
Layer Navigation
The Modes and Layer control row across
the top of the panel in combination with
the Access buttons row and ‘B’ button
row just below which allows the user to
navigate across the various layers of the
console of which there are 24 arranged
as 12 A/B layers. The 2nd & 3rd button
cells in from the left of that row, select
which layer the user is accessing and the
image below shows that the user is on
Layer 1. The next control area to look at
are the TFT displays above the Access
buttons.
The label at the top of the display shows
the name of the audio path that has been
IU6576 STANDARD 12 FADER PANEL DETAIL
placed there with the Fader Layout
function as well as the path width.
The image below shows the path on
Fader 2A has been ‘Accessed’ as the
bottom left of that TFT display shows.
Note the ‘Main 3’ path on fader 3B next
to it, the B-layer paths are accessed using
the ‘B’ button as highlighted in Yellow.
There is a further TFT display row shown
at the bottom of the panel which shows
both the A and B layer paths
Mode Navigation
Once the required path has been chosen
the user can then decide which mode
of control they wish to apply. There are
4 primary modes: Processing, Routing,
Buses & Monitoring modes which are
selected from the 5th cell in the Modes and
Layers row. Once selected, the 5th, 6th,
7th & 8th rows show the various functions
within that mode. The image below shows
that the user has selected the Processing
mode and accessed the Input function.
The Touch screen panel (shown on the
previous page) will change to display the
Input functions page and all the control
parameters that are available for that
path. Those parameters can then either
be controlled from the Touchscreen using
touch and drag gestures, or from the Wild
Assign panel using physical rotary controls
and buttons cells with their own displays,
these controls are shown on the next page.